Blog

Rubber Two Roll Mixing Mill The rubber two roll mixing mill is to be used for raw rubber cracking and scrip rubber cracking in rubber reclaim industry. This machine is mainly used

The main differences between the screws of cold feed extruder and hot feed extruder are as follows: Length-to-diameter ratio: The length-to-diameter ratio of cold feed extruder is

Install the vibration absorber as close to the compressor or vibration source as possible. Always install perpendicular to the major axis of vibration. Anhor the refrigerant piping

The applicable fields of cold feed extruders and hot feed extruders are respectively as follows: Cold feed extruder Tire manufacturing: In radial tire production, it is used for tr

A vibration absorber, also known as a vibration isolator or damper, is a device designed to reduce or eliminate unwanted vibrations in a mechanical system. Vibration absorbers are

The differences between a pin-type rubber extruder and a common cold feed extruder lie in the screw structure and the addition of pins. In a pin-type rubber extruder, pins are inse

The working principle of stainless steel flange metal hoses is mainly based on their special structure and material properties, as follows: Principle of Flexible compensation The c

The common connection methods of stainless steel flange metal hoses are as follows: Flange connection This is the most common way of connection. Flange plates are welded to both en

The structure and material of stainless steel flange metal hoses Structure : Mainly composed of corrugated pipes, mesh sleeves and flanges. The inner pipe is a thin-walled stainles

The characteristics of stainless steel flange metal hoses is as follows: 1 Good flexibility: It has strong flexibility, extensibility, bending and vibration resistance capabilities

The commonly used expansion joints in the construction industry mainly include the following types: Corrugated expansion joint Axial bellows expansion joint: It is mainly used to c

Even if stainless steel metal hoses are within the temperature range they can withstand, they may still be damaged for the following reasons: Stress factor If the system pressure i