Rubber Block Cutting Machine
Introduction
This Machine is used to cut the strip elastic material without metals into 50 X 50 mm block.
Working Principle：The elastic strip material ≤60mm wide is fed by the feeding mechanism, and the moving knife group is driven by the motor to cut the elastic strip material into ≤50×50mm blocks. In the process of cutting, the material is cut by the shear and tear action of moving knife and fixed knife. When cutting, feed through automatic feeding mechanism.
Characteristic
The equipment adopts automatic feeding method to save labor cost.
The tool used in the equipment adopts scissor-shaped working structure, so that the cutting process is more labor-saving and energy consumption is low.
The cutting tool material used in the equipment is special hard alloy, which can be affected by a certain impact, wear resistance, simple structure, convenient disassembly and maintenance, and long service life.
Technical Parameter
|
No |
Equipment Type |
QK-40 |
|
1 |
Main power (kW) |
22 |
|
2 |
Revolution speed of main shaft (r/min) |
380 |
Hot Tags: rubber block cutting machine, China rubber block cutting machine manufacturers, suppliers, factory, XJL 200 Cold Fed Rubber Strainer Extruder Machine, Steel External Pressure Expansion Joint, rubber machinery, productionl line solution, Devulcanizer, Tire Crown Slitting Machine
Previous
Waste Tire Strip Cutting MachineYou Might Also Like
Send Inquiry